pip install -r https://raw.githubusercontent.com/dnouri/kfkd-tutorial/master/requirements-2.txt does not complete #10

Activity

1. tgels

   changed the title [-]pip install -r https://raw.githubusercontent.com/dnouri/kfkd-tutorial/master/requirements-2.txt does ot complete[/-] [+]pip install -r https://raw.githubusercontent.com/dnouri/kfkd-tutorial/master/requirements-2.txt does not complete[/+] on Feb 13, 2015
2. chialikuo commented on Feb 14, 2015

   

   chialikuo

   on Feb 14, 2015

   More actions

   I encountered the exact same problem. Installation hangs at "Running setup.py install for pylearn2"...

   Hope this can be fixed soon.
3. tgels commented on Feb 14, 2015

   

   tgels

   on Feb 14, 2015

   Author

   More actions

   Very weird, I tried this before and after activating virtualenv but still had the same problem. I have now installed pylearn2 manually but don't have the src for this tutorial as the installation aborted. Maybe the src for the tutorial can be installed as part3 so that if env is setup manually folks can install the tutorial on their own ...

   Warm Regards,

   -Nagendra Nagarajayya

   -----Original Message-----
   From: "Chia-Li Kuo" notifications@github.com
   Sent: Saturday, February 14, 2015 4:45am
   To: "dnouri/kfkd-tutorial" kfkd-tutorial@noreply.github.com
   Cc: "tgels" nnagarajayya@ntangle.com
   Subject: Re: [kfkd-tutorial] pip install -r https://raw.githubusercontent.com/dnouri/kfkd-tutorial/master/requirements-2.txt does not complete (#10)

   I encountered the exact same problem. Installation hangs at "Running setup.py install for pylearn2"...
   Hope this can be fixed soon.
   —
   Reply to this email directly or view it on GitHub .
4. chialikuo commented on Feb 15, 2015

   

   chialikuo

   on Feb 15, 2015

   More actions

   I think my problem is with pylearn2. I tried to install pylearn2 on my own with no success, The installation for pylearn2 just hangs forever...

   What source to you need for this tutorial? I only see "kfkd.py" in this Github repository. You might want to get the example code from Lasagne too. But what else??
5. dnouri

   closed this as completedin 3b659ffon Feb 19, 2015
6. flipdazed commented on May 25, 2015

   

   flipdazed

   on May 25, 2015

   More actions

   The following is in the file pylearn2/setup.py..

   Basically it will hang forever because it is expecting an input as shown on the final line below...

   I got around the issue by just following the instructions here

       print("Because Pylearn2 is under heavy development, we generally do "
             "not advice using the `setup.py install` command. Please "
             "consider using the `setup.py develop` command instead for the "
             "following reasons:\n\n1. Using `setup.py install` creates a "
             "copy of the Pylearn2 source code in your Python installation "
             "path. In order to update Pylearn2 afterwards you will need to "
             "rerun `setup.py install` (!). Simply using `git pull` to "
             "update your local copy of Pylearn2 code will not suffice. \n\n"
             "2. When using `sudo` to install Pylearn2, all files, "
             "including the tutorials, will be copied to a directory owned "
             "by root. Not only is running tutorials as root unsafe, it "
             "also means that all Pylearn2-related environment variables "
             "which were defined for the user will be unavailable.\n\n"
             "Pressing enter will continue the installation of Pylearn2 in "
             "`develop` mode instead. Note that this means that you need to "
             "keep this folder with the Pylearn2 code in its current "
             "location. If you know what you are doing, and are very sure "
             "that you want to install Pylearn2 using the `install` "
             "command instead, please type `install`.\n")
   
       mode = None
       while mode not in ['', 'install', 'develop', 'cancel']:
           if mode is not None:
               print("Please try again")
           mode = input("Installation mode: [develop]/install/cancel: ")
   
7. dnouri commented on May 26, 2015

   

   dnouri

   on May 26, 2015

   Owner

   More actions

   The following is in the file pylearn2/setup.py..

   Basically it will hang forever because it is expecting an input as
   shown below...

   As shown below? Where is it expecting an input?
8. flipdazed commented on May 27, 2015

   

   flipdazed

   on May 27, 2015

   More actions

   updated to show the next line which asked for input. Just install from source.
9. slampenny commented on Oct 7, 2015

   

   slampenny

   on Oct 7, 2015

   More actions

   I install to various boxes using "pip install -r requirements.txt", so I didn't want to install from source. Instead, I forked the project to https://github.com/mashupmachine/pylearn2, changed 'mode' to '' from None and it now installs perfectly with pip. Naturally, for production, I'll change mode to 'install' in a separate branch.
10. dnouri

    reopened this on Oct 7, 2015