[probonopd]

Repository: https://github.com/adrienm7/ergopti

Disposition clavier ergonomique Ergopti, optimisée pour l’écriture du français, de l’anglais et du code.

• Stars: 14
• Release with the AppImage: v1.0.1 (2026-10-11T23:29:58Z)
• AppImage asset: ErgoptiPlus-linux-x86_64.AppImage
• License: MIT

Found by .github/workflows/discover-apps.yml, which looks for GitHub
repositories that publish AppImages but are not in the catalog yet. This
entry was not tested by a human; please review it before merging.

[github-actions]

❌ Test failure

@adrienm7: this pull request adds the AppImage from your GitHub repository to the AppImage catalog; the test reports the following. Could you have a look?

Tested:

• ErgoptiPlus-linux-x86_64.AppImage from release v1.0.1

Compatibility: not self-contained: uses the C library of the system; references glibc 2.38

Names:

WARNING: AppImage name 'ErgoptiPlus-linux-x86_64.AppImage': should not contain 'Linux', since all AppImages are for Linux (e.g. 'App-1.0-x86_64.AppImage', not 'App-1.0-linux-x86_64.AppImage')

• The AppImage needs a newer C library (glibc, or the C++ library libstdc++) than the test system has; the error names the version that is missing (e.g. GLIBC_2.38). The test runs on the oldest Ubuntu LTS release that is still in standard support (see https://ubuntu.com/about/release-cycle), because an AppImage is meant to run on any current Linux distribution, including older ones, and glibc can only be as old as the system the AppImage was built on: a program built on a newer system links against symbols that older systems do not have. The fix is to build on the oldest still-supported LTS release (in GitHub Actions, the oldest ubuntu-* runner still offered, or a container of that release), not on the newest system. If the program itself needs a newer compiler, build in a container of the old release with a newer toolchain (e.g. the toolchain PPAs), statically link what needs it, or bundle the C library together with its dynamic loader (ld-linux) in the AppImage: then the host's glibc does not matter at all (the test reports X-AppImage-Libc=bundled). See https://docs.appimage.org/reference/best-practices.html#binaries-compiled-on-old-enough-base-system
• The application quit or crashed right after starting; the error below usually shows why. Note that the test runs the application without network access, on purpose, and that this is a requirement for the catalog: an AppImage must start without network (users are offline too). If the application needs a server, a login or an update check to start, please make it show its window (or at least a message) first and connect afterwards, and handle a failed connection instead of exiting.
• Please check the remarks about the names below.

First error in the log:

/run/firejail/appimage/usr/bin/luajit: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /run/firejail/appimage/usr/bin/luajit)
/run/firejail/appimage/usr/bin/luajit: /lib/x86_64-linux-gnu/libm.so.6: version `GLIBC_2.38' not found (required by /run/firejail/appimage/usr/bin/luajit)

The application showed no window, but may be a system tray application (usr/lib/ergopti/HARDWARE.md: StatusNotifierItem); running it again with a system tray
/run/firejail/appimage/usr/bin/luajit: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /run/firejail/appimage/usr/bin/luajit)
/run/firejail/appimage/usr/bin/luajit: /lib/x86_64-linux-gnu/libm.so.6: version `GLIBC_2.38' not found (required by /run/firejail/appimage/usr/bin/luajit)
No icon appeared in the system tray either
ERROR: The application exited within 11 seconds instead of showing a window

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit 5d42239. Full log

[adrienm7]

C:/Program Files/Git/retest

[github-actions]

❌ Test failure

Tested:

• ErgoptiPlus-x86_64.AppImage from release v1.0.3

Compatibility: not self-contained: uses the C library of the system; references glibc 2.34

• The application quit or crashed right after starting; the error below usually shows why. Note that the test runs the application without network access, on purpose, and that this is a requirement for the catalog: an AppImage must start without network (users are offline too). If the application needs a server, a login or an update check to start, please make it show its window (or at least a message) first and connect afterwards, and handle a failed connection instead of exiting.

First error in the log:

Error: no keyboard device detected. Specify one with --device.
2026-10-18 20:46:21:000 [INFO] [i18n] Available locales: da, de, en, es, fr, it, nl, no, pl, pt, sv, tr, cs, ru, uk, he, ar, hi, zh, ja, ko.
2026-10-18 20:46:21:000 [INFO] [i18n] i18n initialised (locale=fr, 21 available).
Ergopti+ ne peut pas encore utiliser le clavier — no keyboard device detected
Ergopti+ ne peut pas encore lire le clavier ni écrire dans /dev/uinput. Déconnectez-vous puis reconnectez-vous (ou redémarrez) pour que les groupes « input » et « uinput » ajoutés par l’installateur prennent effet. Si le problème persiste, lancez : bash '/run/firejail/appimage/usr/lib/erg
2026-10-18 20:46:21:000 [WARNING] [adapters.notifier] notify-send is not installed — notifications stay in the log. Install libnotify-bin (Debian) or libnotify-tools (Fedora/Arch).
2026-10-18 20:46:21:000 [INFO] [adapters.notifier] [notification] ErgoptiPlus — ✖ Accès au clavier indisponible: Ergopti+ ne peut pas encore lire le clavier ni écrire dans /dev/uinput. Déconnectez-vous puis reconnectez-vous (ou redémarrez) pour que les groupes « input » et « uinput » ajo
2026-10-18 20:46:21:000 [ERROR] [platform.tray.appindicator] Tray unavailable — libayatana-appindicator3 is missing. Try: sudo apt-get install libayatana-appindicator3-1

The application showed no window, but may be a system tray application (usr/lib/ergopti/HARDWARE.md: StatusNotifierItem); running it again with a system tray
2026-10-18 20:46:32:000 [DONE] [infra.manifest_reader] Features manifest loaded (v2.0.0, 187 feature(s)).
2026-10-18 20:46:32:000 [DEBUG] [toml_reader] Parsing TOML file…
2026-10-18 20:46:32:000 [INFO] [toml_reader] TOML file parsed successfully.
2026-10-18 20:46:32:000 [DEBUG] [modules.updater.manager] Loaded updater defaults from /run/firejail/appimage/usr/lib/ergopti/_shared/modules/updater/defaults.json.
2026-10-18 20:46:32:000 [INFO] [modules.shortcuts.manager] Wrap-symbol catalogue loaded from shared SSoT (65 lookup key(s)).
2026-10-18 20:46:32:000 [DEBUG] [ui.webview_manager] lgi not available — webview rendering disabled (pure-Lua bridge mode).

What next: once the AppImage is fixed (e.g. in a new release), comment /retest here to test it again. If it should not be in the catalog after all, close this pull request; an app that is already in the catalog can be removed by a maintainer with /remove.

Commit 5d42239. Full log