Skip to content

Error using SPI library #2

Open
Open
Error using SPI library#2

Description

@trinami
trinami
opened on Sep 29, 2023

Hey ive tried to use youre repo. Does it work?

I get this error:

`Processing sipeed-longan-nano (platform: gd32v; board: sipeed-longan-nano; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/gd32v/sipeed-longan-nano.html
PLATFORM: GigaDevice GD32V (1.3.0) > Sipeed Longan Nano
HARDWARE: GD32VF103CBT6 108MHz, 32KB RAM, 128KB Flash
DEBUG: Current (altera-usb-blaster) External (altera-usb-blaster, gd-link, jlink, rv-link, sipeed-rv-debugger, um232h)
PACKAGES:

  • framework-arduino-gd32v @ 0.2.3+sha.fd2d438
  • toolchain-gd32v @ 9.2.0
    LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
    LDF Modes: Finder ~ chain, Compatibility ~ soft
    Found 23 compatible libraries
    Scanning dependencies...
    Dependency Graph
    |-- SD(gd32v) @ 1.2.4
    |-- SPI @ 0.1
    Building in release mode
    Compiling .pio/build/sipeed-longan-nano/src/main.cpp.o
    Compiling .pio/build/sipeed-longan-nano/libcc1/SD/File.cpp.o
    Compiling .pio/build/sipeed-longan-nano/libcc1/SD/SD.cpp.o
    Compiling .pio/build/sipeed-longan-nano/libcc1/SD/utility/Sd2Card.cpp.o
    Compiling .pio/build/sipeed-longan-nano/libcc1/SD/utility/SdFile.cpp.o
    Compiling .pio/build/sipeed-longan-nano/libcc1/SD/utility/SdVolume.cpp.o
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:26,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFile.cpp:20:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2PinMap.h:544:2: error: #error Architecture or board not supported.
    544 | #error Architecture or board not supported.
    | ^~~~~
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:26,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdVolume.cpp:20:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2PinMap.h:544:2: error: #error Architecture or board not supported.
    544 | #error Architecture or board not supported.
    | ^~~~~
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:26,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/SD.h:20,
    from src/main.cpp:3:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2PinMap.h:544:2: error: #error Architecture or board not supported.
    544 | #error Architecture or board not supported.
    | ^~~~~
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:26,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/SD.h:20,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/File.cpp:15:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2PinMap.h:544:2: error: #error Architecture or board not supported.
    544 | #error Architecture or board not supported.
    | ^~~~~
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:26,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.cpp:22:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2PinMap.h:544:2: error: #error Architecture or board not supported.
    544 | #error Architecture or board not supported.
    | ^~~~~
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:26,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/SD.h:20,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/SD.cpp:53:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2PinMap.h:544:2: error: #error Architecture or board not supported.
    544 | #error Architecture or board not supported.
    | ^~~~~
    Compiling .pio/build/sipeed-longan-nano/FrameworkArduino/wiring_analog.c.o
    Compiling .pio/build/sipeed-longan-nano/FrameworkArduino/wiring_digital.c.o
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/SD.h:20,
    from src/main.cpp:3:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:80:31: error: 'MOSI' was not declared in this scope
    80 | uint8_t const SPI_MOSI_PIN = MOSI;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:82:31: error: 'MISO' was not declared in this scope
    82 | uint8_t const SPI_MISO_PIN = MISO;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:84:30: error: 'SCK' was not declared in this scope
    84 | uint8_t const SPI_SCK_PIN = SCK;
    | ^~~
    Compiling .pio/build/sipeed-longan-nano/FrameworkArduino/wiring_pulse.c.o
    Compiling .pio/build/sipeed-longan-nano/FrameworkArduino/wiring_shift.c.o
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/SD.h:20,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/File.cpp:15:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:80:31: error: 'MOSI' was not declared in this scope
    80 | uint8_t const SPI_MOSI_PIN = MOSI;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:82:31: error: 'MISO' was not declared in this scope
    82 | uint8_t const SPI_MISO_PIN = MISO;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:84:30: error: 'SCK' was not declared in this scope
    84 | uint8_t const SPI_SCK_PIN = SCK;
    | ^~~
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFile.cpp:20:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:80:31: error: 'MOSI' was not declared in this scope
    80 | uint8_t const SPI_MOSI_PIN = MOSI;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:82:31: error: 'MISO' was not declared in this scope
    82 | uint8_t const SPI_MISO_PIN = MISO;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:84:30: error: 'SCK' was not declared in this scope
    84 | uint8_t const SPI_SCK_PIN = SCK;
    | ^~~
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.cpp:22:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:80:31: error: 'MOSI' was not declared in this scope
    80 | uint8_t const SPI_MOSI_PIN = MOSI;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:82:31: error: 'MISO' was not declared in this scope
    82 | uint8_t const SPI_MISO_PIN = MISO;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:84:30: error: 'SCK' was not declared in this scope
    84 | uint8_t const SPI_SCK_PIN = SCK;
    | ^~~
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdVolume.cpp:20:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:80:31: error: 'MOSI' was not declared in this scope
    80 | uint8_t const SPI_MOSI_PIN = MOSI;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:82:31: error: 'MISO' was not declared in this scope
    82 | uint8_t const SPI_MISO_PIN = MISO;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:84:30: error: 'SCK' was not declared in this scope
    84 | uint8_t const SPI_SCK_PIN = SCK;
    | ^~~
    In file included from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/SdFat.h:29,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/SD.h:20,
    from /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/SD.cpp:53:
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:80:31: error: 'MOSI' was not declared in this scope
    80 | uint8_t const SPI_MOSI_PIN = MOSI;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:82:31: error: 'MISO' was not declared in this scope
    82 | uint8_t const SPI_MISO_PIN = MISO;
    | ^~~~
    /home/user/.platformio/packages/framework-arduino-gd32v/libraries/SD/src/utility/Sd2Card.h:84:30: error: 'SCK' was not declared in this scope
    84 | uint8_t const SPI_SCK_PIN = SCK;
    | ^~~
    *** [.pio/build/sipeed-longan-nano/src/main.cpp.o] Error 1
    *** [.pio/build/sipeed-longan-nano/libcc1/SD/File.cpp.o] Error 1
    *** [.pio/build/sipeed-longan-nano/libcc1/SD/utility/Sd2Card.cpp.o] Error 1
    *** [.pio/build/sipeed-longan-nano/libcc1/SD/utility/SdVolume.cpp.o] Error 1
    *** [.pio/build/sipeed-longan-nano/libcc1/SD/utility/SdFile.cpp.o] Error 1
    *** [.pio/build/sipeed-longan-nano/libcc1/SD/SD.cpp.o] Error 1
    ========================================================================== [FAILED] Took 0.54 seconds ==========================================================================
  • The terminal process "platformio 'run'" terminated with exit code: 1.
  • Terminal will be reused by tasks, press any key to close it.
    `

my platformio.ini:

[env:sipeed-longan-nano] platform = gd32v board = sipeed-longan-nano framework = arduino platform_packages = framework-arduino-gd32v @ https://github.com/scpcom/Longduino.git

my main.cpp:

`#include <Arduino.h>
#include <SPI.h>
#include <SD.h>

void setup()
{
delay(5000);
Serial.begin(9600);
while(!Serial);
}

void loop()
{
Serial.println("serial ok");
delay(5000);
}
`

what am i doing wrong? How can i fix it? Im a Arduino beginner.
Ive tried to use #define GD32V in main.cpp but doesnt work.

Thank you :)

Activity

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions