Hidden tests - @t-ice #4

mak-gitdev · 2024-01-08T18:56:33Z

mak-gitdev
Jan 8, 2024
Maintainer

Please install this preview version and have a look at the useful data shared by @fabi9163 here.
Do not hesitate if you have any questions.

t-ice · 2024-01-15T19:13:45Z

t-ice
Jan 15, 2024

Thank you very much! I have my FSB14 and FRS14-2 working now.

I noticed that the final state message is send by the FSB14 as soon as the delay time (release delay RV) is reached.
I tried to set the RV on the FSB14 as close as possible to the shut_time, but for some of my shutters, it takes up to 28 sec to get the feedback by the FSB14 after the final state is reached.
Is it also possible to already set the final state for the cover entity by using the shut_time and at latest by the final state message?

4 replies

mak-gitdev Jan 17, 2024
Maintainer Author

Hi @t-ice,

Nice that it works for you 😉

Regarding the final state, are you referring to end_top and end_bottom binary sensors ?
If so, I wasn't expected to keep those beyond the test phase, unless you think it could be useful.
In fact, the cover entity should give you all the information you need regarding the cover movement.
When the cover is moving up or down, the state of the cover is either opening or closing.
Then as soon as the cover reaches the final state, I expect the cover entity state to switch to either open or closed without any delay.
Are you observing a delay there ?

t-ice Jan 17, 2024

Unfortunately, the FSB14 sends the final state telegram only after the RV has passed, e.g.:
The shut time of Aktor_Raffstore_EG_Esszimmer_Rechts is ~62 seconds.
The RV is set to 90sec, because it should be > shut time, see also https://www.eltako.com/fileadmin/downloads/en/_datasheets/Datasheet_FSB14.pdf.

2024-01-17 17:21:25,081 DEBUG: FF:94:CE:9B->FF:FF:FF:FF (-46 dBm): 0x01 ['0xf6', '0x2', '0xff', '0x94', '0xce', '0x9b', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x2e', '0x0'] OrderedDict()
2024-01-17 17:21:25,082 INFO: received: FF:94:CE:9B->FF:FF:FF:FF (-46 dBm): 0x01 ['0xf6', '0x2', '0xff', '0x94', '0xce', '0x9b', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x2e', '0x0'] OrderedDict()
2024-01-17 17:21:25,083 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: R1 (Rocker 1st action)=Button AI 
2024-01-17 17:21:25,083 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: EB (Energy bow)=released 
2024-01-17 17:21:25,084 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: R2 (Rocker 2nd action)=Button AO 
2024-01-17 17:21:25,084 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: SA (2nd action)=No 2nd action 
2024-01-17 17:21:25,084 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: T21 (T21)=True 
2024-01-17 17:21:25,084 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: NU (NU)=True 
2024-01-17 17:21:25,085 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: Sent MQTT: {"_RSSI_": -46, "_DATE_": "2024-01-17T17:21:25.081411", "_RAW_DATA_": "02:30", "R1": 0, "EB": 0, "R2": 1, "SA": 0, "T21": true, "NU": true}
2024-01-17 17:21:25,085 DEBUG: Sending PUBLISH (d0, q0, r1, m45619), 'b'enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6'', ... (139 bytes)
2024-01-17 17:22:13,131 DEBUG: Sending PINGREQ
2024-01-17 17:22:13,132 DEBUG: Received PINGRESP
2024-01-17 17:22:55,979 DEBUG: FF:94:CE:9B->FF:FF:FF:FF (-48 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x94', '0xce', '0x9b', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x30', '0x0'] OrderedDict()
2024-01-17 17:22:55,980 INFO: received: FF:94:CE:9B->FF:FF:FF:FF (-48 dBm): 0x01 ['0xf6', '0x50', '0xff', '0x94', '0xce', '0x9b', '0x30'] ['0x0', '0xff', '0xff', '0xff', '0xff', '0x30', '0x0'] OrderedDict()
2024-01-17 17:22:55,981 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: R1 (Rocker 1st action)=Button BI 
2024-01-17 17:22:55,981 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: EB (Energy bow)=pressed 
2024-01-17 17:22:55,981 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: R2 (Rocker 2nd action)=Button AI 
2024-01-17 17:22:55,982 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: SA (2nd action)=No 2nd action 
2024-01-17 17:22:55,982 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: T21 (T21)=True 
2024-01-17 17:22:55,982 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: NU (NU)=True 
2024-01-17 17:22:55,983 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6: Sent MQTT: {"_RSSI_": -48, "_DATE_": "2024-01-17T17:22:55.979494", "_RAW_DATA_": "50:30", "R1": 2, "EB": 1, "R2": 0, "SA": 0, "T21": true, "NU": true}
2024-01-17 17:22:55,983 DEBUG: Sending PUBLISH (d0, q0, r1, m45620), 'b'enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/f6'', ... (139 bytes)

The telegram is received after 90 seconds, which means the cover entity had the closing state for 28seconds although the shutter was already closed. As soon as the telegram is received, the cover entity reflects the real state of the shutter.
It's a pity that the actuator doesn't recognize the stop of the shutter drive, when the final state is reached.

mak-gitdev Jan 17, 2024
Maintainer Author

@t-ice,

I suppose you use the up and down arrows to move the cover, right ?
Is the behavior different if you use the position to move the cover completely up and down ?

t-ice Jan 20, 2024

Thanks, you are right, I get immediately feedback by using the position.

t-ice · 2024-02-04T09:09:14Z

t-ice
Feb 4, 2024

One thing which I noticed is that when using an automation and triggering many devices at once, only some of them are working.
If I add a delay of for example 200ms between each service action, it works without problems.

A non working example:

action:
  - service: cover.close_cover
    metadata: {}
    data: {}
    target:
      entity_id:
        - cover.e2m_aktor_raffstore_eg_esszimmer_links_cover
        - cover.e2m_aktor_raffstore_eg_esszimmer_rechts_cover
        - cover.e2m_aktor_raffstore_eg_kueche_cover
        - cover.e2m_aktor_raffstore_eg_wohnzimmer_links_cover
        - cover.e2m_aktor_raffstore_eg_wohnzimmer_rechts_cover
        - cover.e2m_aktor_rolladen_og_ankleide_cover
        - cover.e2m_aktor_rolladen_og_bad_cover
        - cover.e2m_aktor_rolladen_og_finn_cover
        - cover.e2m_aktor_rolladen_og_kind_2_cover

2024-02-04 09:54:57,536 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Rolladen_OG_Finn/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,537 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Rolladen_OG_Finn/a5/req
2024-02-04 09:54:57,537 DEBUG: Send Payload: clear
2024-02-04 09:54:57,537 DEBUG: enocean2mqtt/Aktor_Rolladen_OG_Finn/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,538 DEBUG: Trigger message to: enocean2mqtt/Aktor_Rolladen_OG_Finn/a5
2024-02-04 09:54:57,541 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,546 INFO: sending: FF:AE:7C:8A->FF:94:CE:87 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x8a', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x87', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,546 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,546 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Rolladen_OG_Schalfzimmer/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,547 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Rolladen_OG_Schalfzimmer/a5/req
2024-02-04 09:54:57,547 DEBUG: Send Payload: clear
2024-02-04 09:54:57,548 DEBUG: enocean2mqtt/Aktor_Rolladen_OG_Schalfzimmer/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,548 DEBUG: Trigger message to: enocean2mqtt/Aktor_Rolladen_OG_Schalfzimmer/a5
2024-02-04 09:54:57,549 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,551 INFO: sending: FF:AE:7C:8B->FF:94:CE:88 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x8b', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x88', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,551 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,552 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Raffstore_EG_Wohnzimmer_Links/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,552 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Raffstore_EG_Wohnzimmer_Links/a5/req
2024-02-04 09:54:57,552 DEBUG: Send Payload: clear
2024-02-04 09:54:57,552 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Wohnzimmer_Links/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,552 DEBUG: Trigger message to: enocean2mqtt/Aktor_Raffstore_EG_Wohnzimmer_Links/a5
2024-02-04 09:54:57,553 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,554 INFO: sending: FF:AE:7C:82->FF:94:CE:86 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x82', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x86', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,554 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,554 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Rolladen_OG_Bad/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,554 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Rolladen_OG_Bad/a5/req
2024-02-04 09:54:57,554 DEBUG: Send Payload: clear
2024-02-04 09:54:57,554 DEBUG: enocean2mqtt/Aktor_Rolladen_OG_Bad/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,555 DEBUG: Trigger message to: enocean2mqtt/Aktor_Rolladen_OG_Bad/a5
2024-02-04 09:54:57,555 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,557 INFO: sending: FF:AE:7C:89->FF:94:CE:A1 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x89', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0xa1', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,557 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,557 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Rolladen_OG_Kind_2/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,557 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Rolladen_OG_Kind_2/a5/req
2024-02-04 09:54:57,557 DEBUG: Send Payload: clear
2024-02-04 09:54:57,557 DEBUG: enocean2mqtt/Aktor_Rolladen_OG_Kind_2/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,557 DEBUG: Trigger message to: enocean2mqtt/Aktor_Rolladen_OG_Kind_2/a5
2024-02-04 09:54:57,558 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,558 INFO: Sending packet
2024-02-04 09:54:57,559 INFO: sending: FF:AE:7C:8D->FF:94:CE:9F (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x8d', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x9f', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,560 DEBUG: FF:AE:7C:8A->FF:94:CE:87 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x8a', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x87', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,560 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,560 INFO: Sending packet
2024-02-04 09:54:57,560 DEBUG: FF:AE:7C:8B->FF:94:CE:88 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x8b', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x88', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,560 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Raffstore_EG_Wohnzimmer_Rechts/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,560 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Raffstore_EG_Wohnzimmer_Rechts/a5/req
2024-02-04 09:54:57,561 INFO: Sending packet
2024-02-04 09:54:57,561 DEBUG: Send Payload: clear
2024-02-04 09:54:57,561 DEBUG: FF:AE:7C:82->FF:94:CE:86 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x82', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x86', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,561 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Wohnzimmer_Rechts/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,561 DEBUG: Trigger message to: enocean2mqtt/Aktor_Raffstore_EG_Wohnzimmer_Rechts/a5
2024-02-04 09:54:57,561 INFO: Sending packet
2024-02-04 09:54:57,562 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,562 DEBUG: FF:AE:7C:89->FF:94:CE:A1 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x89', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0xa1', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,563 INFO: sending: FF:AE:7C:81->FF:94:CE:9C (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x81', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x9c', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,564 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,564 INFO: Sending packet
2024-02-04 09:54:57,564 DEBUG: FF:AE:7C:8D->FF:94:CE:9F (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x8d', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x9f', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,564 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Raffstore_EG_Kueche/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,564 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Raffstore_EG_Kueche/a5/req
2024-02-04 09:54:57,564 INFO: Sending packet
2024-02-04 09:54:57,564 DEBUG: Send Payload: clear
2024-02-04 09:54:57,565 DEBUG: FF:AE:7C:81->FF:94:CE:9C (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x81', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x9c', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,565 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Kueche/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,565 DEBUG: Trigger message to: enocean2mqtt/Aktor_Raffstore_EG_Kueche/a5
2024-02-04 09:54:57,566 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,567 INFO: sending: FF:AE:7C:85->FF:94:CE:9A (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x85', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x9a', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,567 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,567 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Rolladen_OG_Ankleide/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,567 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Rolladen_OG_Ankleide/a5/req
2024-02-04 09:54:57,567 DEBUG: Send Payload: clear
2024-02-04 09:54:57,567 DEBUG: enocean2mqtt/Aktor_Rolladen_OG_Ankleide/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,568 DEBUG: Trigger message to: enocean2mqtt/Aktor_Rolladen_OG_Ankleide/a5
2024-02-04 09:54:57,568 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,570 INFO: sending: FF:AE:7C:8C->FF:94:CE:A0 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x8c', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0xa0', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,570 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,570 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Links/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,570 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Links/a5/req
2024-02-04 09:54:57,570 DEBUG: Send Payload: clear
2024-02-04 09:54:57,570 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Links/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,570 DEBUG: Trigger message to: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Links/a5
2024-02-04 09:54:57,571 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,572 INFO: sending: FF:AE:7C:83->FF:94:CE:85 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x83', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x85', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,572 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,572 DEBUG: Received PUBLISH (d0, q0, r0, m0), 'enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/a5/req', ...  (56 bytes)
2024-02-04 09:54:57,572 DEBUG: Got MQTT message: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/a5/req
2024-02-04 09:54:57,573 DEBUG: Send Payload: clear
2024-02-04 09:54:57,573 DEBUG: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/a5: req={'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,573 DEBUG: Trigger message to: enocean2mqtt/Aktor_Raffstore_EG_Esszimmer_Rechts/a5
2024-02-04 09:54:57,573 DEBUG: sensor data: {'DB3': 0, 'DB2': 0, 'DB1': 2, 'DB0': 8}
2024-02-04 09:54:57,575 INFO: sending: FF:AE:7C:84->FF:94:CE:9B (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x84', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x9b', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,575 DEBUG: Clearing data buffer.
2024-02-04 09:54:57,580 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-02-04 09:54:57,580 INFO: got response packet: OK
2024-02-04 09:54:57,580 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-02-04 09:54:57,580 INFO: got response packet: OK
2024-02-04 09:54:57,580 INFO: Sending packet
2024-02-04 09:54:57,580 DEBUG: FF:AE:7C:85->FF:94:CE:9A (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x85', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x9a', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,581 INFO: Sending packet
2024-02-04 09:54:57,581 DEBUG: FF:AE:7C:8C->FF:94:CE:A0 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x8c', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0xa0', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,581 INFO: Sending packet
2024-02-04 09:54:57,581 DEBUG: FF:AE:7C:83->FF:94:CE:85 (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x83', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x85', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,581 INFO: Sending packet
2024-02-04 09:54:57,581 DEBUG: FF:AE:7C:84->FF:94:CE:9B (-255 dBm): 0x01 ['0xa5', '0x0', '0x0', '0x2', '0x8', '0xff', '0xae', '0x7c', '0x84', '0x0'] ['0x3', '0xff', '0x94', '0xce', '0x9b', '0xff', '0x0'] OrderedDict([('DB3', {'description': 'Data Byte 3', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB2', {'description': 'Data Byte 2', 'unit': '', 'value': 0.0, 'raw_value': 0}), ('DB1', {'description': 'Data Byte 1', 'unit': '', 'value': 2.0, 'raw_value': 2}), ('DB0', {'description': 'Data Byte 0', 'unit': '', 'value': 8.0, 'raw_value': 8})])
2024-02-04 09:54:57,612 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-02-04 09:54:57,613 INFO: got response packet: OK
2024-02-04 09:54:57,613 DEBUG: 0x02 ['0x0'] [] OrderedDict()
2024-02-04 09:54:57,614 INFO: got response packet: OK

1 reply

mak-gitdev Feb 4, 2024
Maintainer Author

Hi @t-ice,

Yes this has been reported here as well.
My feeling is that the receiver (FAM14) cannot handle the throughtput.
That's why adding a delay between each command solves the issue.

Hidden tests - @t-ice #4

Uh oh!

mak-gitdev Jan 8, 2024 Maintainer

Replies: 2 comments · 5 replies

Uh oh!

Uh oh!

t-ice Jan 15, 2024

Uh oh!

mak-gitdev Jan 17, 2024 Maintainer Author

Uh oh!

Uh oh!

t-ice Jan 17, 2024

Uh oh!

mak-gitdev Jan 17, 2024 Maintainer Author

Uh oh!

t-ice Jan 20, 2024

Uh oh!

Uh oh!

t-ice Feb 4, 2024

Uh oh!

mak-gitdev Feb 4, 2024 Maintainer Author

mak-gitdev
Jan 8, 2024
Maintainer

Replies: 2 comments 5 replies

t-ice
Jan 15, 2024

mak-gitdev Jan 17, 2024
Maintainer Author

mak-gitdev Jan 17, 2024
Maintainer Author

t-ice
Feb 4, 2024

mak-gitdev Feb 4, 2024
Maintainer Author